loading img

No.6400-00

- Discontinued - Handy Type pH Meter

SK-620PH + PHP-31

JAN code : 4974425405503

Calibration : Available

JCSS Accredited Calibration : Not available

This product is discontinued. Refer to its upgraded model SK-620PHII (Cat. No. 6435-00).

    • Instruction manual

Feature

Equipped with a dedicated probe PHP-31

Automatic temperature compensation available when PHP-31 probe is attached

Three-point calibration available for a precise measurement

(pH 4.01 phthalate, pH 6.86 neutral phosphate, pH 10.01 carbonate)

* The pH above are under condition of 25°C.

Auto power-off if not in use for 20 minutes

LCD backlight

Remembers maximum and minimum values

Endless measurement available with an AC adapter sold separately

RS-232C output available

A vinyl cover attached to protect the main body from splashed water

Description

Notice

- The sensor may be damaged to shorten its life if it is used for liquids such as organic solvents, oils, adhesives, surface-active agents, strong acids (pH 0 to 2), or strong alkalis (pH 12 to 14).

- The reading may become unstable if you measure pure of tap water.

- If you measure food or drink, take a sufficient quantity of a sample in a separate container so that the end of the sensor is immersed at least 3 cm in the sample. Do not eat or drink the sample after measurement.

- The sensor is made of glass, so take a great care in handling. Be careful not to injure yourself when it is broken.

Lineup of calibration solutions

Calibration solutions

Catalog No.Item
6401-10Phthalate Solution, pH 4.01, 500 mL
6402-10Neutral Phosphate Solution, pH 6.86, 500 mL
6403-10Carbonate Solution, pH 10.01, 500 mL
6404-10Borate Solution, pH 9.18, 500 mL

Calibration solutions with certificates by JCSS, an ILAC-accredited authority

Catalog No.Item
6401-00Phthalate Solution, pH 4.01, 500 mL
6402-00Neutral Phosphate Solution, pH 6.86, 500 mL
6403-00Carbonate Solution, pH 10.01, 500 mL
6404-00Borate Solution, pH 9.18, 500 mL

Specifications

Cat. No.6400-00
Product nameHandy Type pH Meter
Model nameSK-620PH + PHP-31
Measuring rangepH0.00 to 14.00
Temperature0 to 50°C
AccuracypH±0.3±1 digit (pH 0.0 to 2.0)
±0.1±1 digit (pH 2.0 to 12.0)
±0.4±1 digit (pH 12.0 to 14.0)
Temperature±0.5°C (20 to 30°C)
±0.7°C (other)
ResolutionpH: 0.01
Temperature: 0.1°C
FunctionsThree-point calibration (pH 4.01, 6.86, 10.01 at 25°C)
LCD backlight
Maximum/Minimum value logging
Auto power-off
DetectorspH: Glass electrode with non-refillable KCl solution
Temperature: Thermistor
Operation ambient0 to 50°C, less than 80%rh without condensing
MaterialsMain body: ABS resin
Probe: Glass
DimensionsMain body: 72 (W) x 182 (H) x 31.5 (D) mm
Probe: 12 mm diameter x 135 mm (L)
Cable: 1 m (L)
WeightMain body: 220 g including a battery
Probe: 76 g
Power9-volt battery x1
Battery lifeApprox. 20 hours in continuous use
Standard accessoriesStandard probe PHP-31 x1, calibration solutions (pH 4.01, 6.86, 10.01) 23 mL x1 for each, electrode cap x1, vinyl cover x1, carrying case x1, 9-volt battery x1, instruction manual