Software for SK-L200 and SK-L200II Series Dataloggers

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

This document describes important information about this product.
Read it thoroughly before use.

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

Software Use Agreements

This software shall be used only by users who have agreed on the following terms:

Exemption from liability

We, Sato Keiryoki Mfg. Co., Ltd., check for general operation performance of the program, however we do not guarantee for those under all possible situations.
We do not take any responsibilities on any damages caused directly or indirectly by this program.

NB. The operation of our software has been checked by a combination of the Japanese edition OS and the device sold in Japan. We shall not guarantee nor support the problems that occurred during the usage of device and/or OS of overseas model (edition).

Copyright

  1. All rights related to the program itself and documentations of the "DATALOGGER for Windows" are reserved by Sato Keiryoki Mfg. Co., Ltd.

  2. The "DATALOGGER for Windows" can be used at free of charge under following limitations:

    • Any decompilation, file analysis or alteration is prohibited.

    • We shall not be responsible for any damage resulting from the use of this program.

    • The responsibilities related to redistribution of the program are entirely onto users; in case of redistribution, the program shall not be used for commercial reasons even when used in-corporation, inter-corporation or by others.
      We shall not be responsible for any damage resulting from the use of the redistributed program.

Features of the software

  1. "DATALOGGER for Windows" is used to set the various settings in the SK-L200 series and SK-L200II series Dataloggers and analyze the acquired data.
    The data measured by the Datalogger can be transferred to a personal computer using "DATALOGGER for Windows" and then displayed as graphs, printed, or analyzed.
    By saving the data as a file in CSV format, it can be analyzed using commercially available CSV-compatible spreadsheet software.

Installation Method

Install "DATALOGGER for Windows Ver. 6.2E" following the instruction as described in "Software_Installation_Manual_S06.pdf".

(Be sure to read before installation)

Caution:If an older version of the software is already installed, you must uninstall it before installing this program.

To ensure correct realtime measurement, observe the following precautions:

  1. Do not activate a screen saver.

  2. Do not activate other software.

  3. Do not use the power saving functions for the display unit and other devices.

  4. Do not use memory-resident software.

Software Download Site

* Be sure to check the OS version and the bit number of your computer before starting the installation and download the applicable software.

Program Name

DATALOGGER for Windows Ver. 6.2E

Model

SK-L200T II
SK-L200TH II
SK-L200TH IIα

OS

Windows7(SP1 or better)

Windows 8
Windows 8.1
Windows 10

*Operation verification has been done by Professional 64-bit and 32-bit editions.

Software Download

The USB Driver has been upgraded for the units having the following serial numbers.

  1. SK-L200T II : No.010851 or later

  2. SK-L200TH IIα : No.008201 or later

Check the serial number of the unit to be used and select the applicable software from the following.
When you have used our dataloggers before and the software have been installed, download applicable software and install the "USB Driver".
*Please do not remove the previous installed USB driver "SK-L200 Seral Port Drivers" because it is needed to use the previous unit.

Download
upgraded version

I don't agree.

Download
non-upgraded version

I don't agree.

Version upgrade content

Corresponds to Windows8, Windows8.1 and Windows10