Software for 4-ch Datalogger Model SK-L400T
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
This document describes important information about this product.
Read it thoroughly before use.
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Software Use Agreements
This software shall be used only by users who have agreed on the following terms:
Exemption from liability
We, Sato Keiryoki Mfg. Co., Ltd., check for general operation performance of the program, however we do not guarantee for those under all possible situations.
We do not take any responsibilities on any damages caused directly or indirectly by this program.
NB. The operation of our software has been checked by a combination of the Japanese edition OS and the device sold in Japan. We shall not guarantee nor support the problems that occurred during the usage of device and/or OS of overseas model (edition).
Copyright
- The copyright of the program "4ch DATALOGGER for Windows" and related documents belongs to Sato Keiryoki Mfg. Co., Ltd.
- The program "4ch DATALOGGER for Windows" can be used at free of charge under the following conditions:
Any decompilation, file analysis or alteration is prohibited.
We shall not be responsible for any damage resulting from the use of this program.
The responsibilities related to redistribution of the program are entirely onto users; in case of redistribution, the program shall not be used for commercial reasons even when used in-corporation, inter-corporation or by others.
We shall not be responsible for any damage resulting from the use of the redistributed program.
Features
4ch DATALOGGER for Windows
"4ch DATALOGGER for Windows" is used to analyze the data measured by 4-ch Datalogger Model SK-L400T. It is possible to log the measured values on the SD card attached and download the data to a personal computer. By using "4ch DATALOGGER for Windows", graph plotting and data analysis can be done. The data saved in CSV format can be also evaluated by using commercial spreadsheet software supporting the "CSV" extension.
Installation Method
Install "4ch DATALOGGER for Windows Ver.1.1E" following "4ch_installmanual.pdf".
(Be sure to read before installation)
Software Download
* Be sure to check the OS version and the bit number of your computer before starting the installation and download the applicable software.
Program Name | 4ch DATALOGGER for Windows Ver.1.1E |
|---|---|
Model | SK-L400T |
OS | Windows XP * Operation verification has been done by Windows 7, Windows 8, Windows 8.1, Windows 10 Professional 64-bit and 32-bit editions. |
Download |